Albany Plumber Pros
  • Home
  • Services
    • Water Heater
    • Drain Cleaning
    • Leak Detection
    • Repiping
    • Sewer
    • Backflow Testing
    • Commercial Plumbing
  • About
  • Contact
  • Privacy
  • Home
  • Services
    • Water Heater
    • Drain Cleaning
    • Leak Detection
    • Repiping
    • Sewer
    • Backflow Testing
    • Commercial Plumbing
  • About
  • Contact
  • Privacy
Search

Backflow Testing

Your Local Backflow Testing Experts

Click To Call 229-297-2259

Backflow Testing Services in Albany, GA

​Backflow testing is an essential plumbing procedure that prevents clean water from mixing with dirty water. At Albany GA Plumbers, we are available to assist you with all the steps involved in your backflow prevention services, including testing, installation, and arranging the paperwork required.
plumbers in albany georgia

What is Backflow?

Backflow is when water that is contaminated mixes with a clean water supply system.
To prevent clean water from being contaminated by dirty water, we call Backflow prevention systems that can be put in place through the installation of valves. Backflow is quite dangerous as it could lead to health challenges If it mixes with your drinking water.

Despite this, these preventive mechanisms can break down, and when that happens, it may allow the water to flow wrongly, which may thereby cause contamination.

These preventive systems vary in their degree of complexity, so you must choose a company that is thoroughly capable of fixing all sorts of backflow prevention systems.
    Picture
Submit
​Inspection should be carried out annually as authorized by the state, municipal or local codes. If your property doesn't pass the backflow inspection, plumbers in Albany can help you with mitigation options to enable you to get back on your feet again.

Types of Backflow

​Back Pressure

Back Pressure is caused by an increase in water pressure rather than a drop in water pressure. When the downstream pressure in a water supply exceeds the pressure at the water source, this occurs. Backpressure and backflow can also be caused by pump failures, a rise in downstream boiler pressure, and improperly pressured high storage tanks.

​Backsiphonage

​Back siphonage is when water flows backwards due to a decline in water pressure. A water main break is the most prevalent source of this problem. If a car should collide with a fire hydrant, water is sprayed into the air, causing the same vacuum effect. Backflow can also occur at home when a garden hose loses pressure, sucking unclean water from the garden back into the potable water supply.

What is backflow testing?

​Firstly, you should know that your backflow testing should only be carried out by professionals who have been trained and certified in testing and repairing backflow devices.

Backflow testing determines whether or not backflow is present in a plumbing system. Fortunately, the procedure is quick and straightforward.

An Albany plumber does backflow testing to see how well backflow preventers are functioning. Backflow preventers are components of the plumbing system that ensures that water flows in the correct direction. They serve as barriers to keep dangerous contaminants out of a community's drinking water.

Backflow preventers are frequently found in the cross-connections that connect clean water to its intended applications. Backflow preventers, for example, are commonly found in equipment such as sprinkler irrigation systems to prevent contamination.

They're required for plumbing systems that could contain dangerous chemicals, industrial fluids, fertilizers, or additional water sources. They are, nonetheless, necessary for home security.

A trained plumber will open and close the valves of the backflow prevention systems during backflow testing to ensure that it is working correctly. The plumber will inspect the valves for leaks, gauge movement, and other signs of a problem.

You're good to go if the valves are working correctly; if not, the plumber Albany GA can most likely make some quick adjustments to ensure your home water stay safe and clean.

Why is Backflow Testing Important?

Backflow testing is essential for avoiding the negative consequences of backflow
Prevention of Diseases
Sewer blockages generate many of the problems related to backflow. Backflow spreads feces and coliform bacteria into the pure water supply, significantly increasing the risk of acquiring a severe infection. Disease outbreaks like dysentery, typhoid, and salmonella have all been linked to fecal contamination from backflow. Other hazardous bacteria can be discovered in sewage and can produce flu-like symptoms such as muscular aches, fevers, nausea, and vomiting.

Prevention of Chemical Contamination
Chemical waste products like herbicides, pesticides, and chemicals like sodium hydroxide can penetrate plumbing systems by backflow. These substances can endanger human health after they've entered the plumbing system.

Protection Against Heavy Metals
Backflow can also cause heavy metal contamination; however, this is more common in public places like restaurants, where carbonated water, for example, can dissolve the copper in soda dispensers and cause copper poisoning. Heavy metals used in metal platings, such as lead, chromium, or arsenic, could leak into the water, causing disease in commercial and residential settings.

​Before Testing is Done:

Licensed plumbers Albany GA must fulfill certain obligations before the test may be carried out:
  • The owner or representative of the property must provide permission for the water to be turned off. If the item being tested supplies a fire line, the shutoff must be reported to the relevant authorities.
  • Examine and document the state of the device assembly and the surrounding environment.
  • Make a note of the device producer, model, serial number, size, and position.

Backflow Testing Process

The actual test can begin after the preliminaries have been completed. Throughout the testing procedure, specific criteria must be met:
  • To make sure the check valves prevent backflow
  • To make sure that the airports open when they are supposed to

There is nothing special a property owner is required to do to prepare for a backflow test. They can, however, make things easier and speed up the process by making sure everyone involved knows the water will be shut off for a while and that they need to make alternative plans for water use or perform the tasks beforehand.

For a licensed plumber to test or install a backflow preventer device, contact us, where quality and professionalism are combined.

Why Choose Us For Your Plumbing Needs?

Don't do something as important as backflow testing by yourself; As a certified backflow testing and repair company, we can help you with everything needed to ensure your water system doesn't get contaminated. We are very thorough with our services as professionalism is our watchword.

Contact us today at 229-297-2259​ to get through to any of our expert plumbers in Albany GA.
Powered by Create your own unique website with customizable templates.
  • Home
  • Services
    • Water Heater
    • Drain Cleaning
    • Leak Detection
    • Repiping
    • Sewer
    • Backflow Testing
    • Commercial Plumbing
  • About
  • Contact
  • Privacy